RICOH imagine.change.Global

CX6 : What is the Focus bracketing (Focus-BKT)?

With focus bracketing, the camera automatically takes five consecutive pictures while adjusting the focus in the following order. You can also adjust the interval of the focus position.

Focusing position Near < Center *1 > Far
Order of shooting 5 4 1 3 2
Order of recording 5 4 3 2 1
  • *1)The focusing position measured with the setting in [Focus].
See the FAQ below for more information about how to set the [Focus].
[Details on the Focusing modes.]

  • When [Focus] is set to [MF], the first picture is taken at the set focus position without being measured.
  • [White Balance] functions according to the [Auto] setting even if it is set to [Multi-P AUTO].
  • The flash cannot be used.
  • Further information on limitations in each shooting mode, consult the chart in the FAQ below.
  • Available [Shooting menu] chart in each shooting mode.

Focus bracketing (Focus-BKT) operations

  • 1Turn the mode dial to a shooting mode.

    Turn the mode dial to a shooting mode.

  • 2Press the [MENU] button to display the shooting menu.

    Press the [MENU] button to display the shooting menu.

  • 3Press the [ADJ./OK] button Down to select [Auto Bracket], and press the button to the right Right (Flash).

    Press the [ADJ./OK] button down to select [Auto Bracket], and press the button to the right.

  • 4Press the [ADJ./OK] button Up Down to select [FOCUS-BKT], and press the [ADJ./OK] button to the right Right (Flash).

    Press the [ADJ./OK] button up and down to select [FOCUS-BKT], and press the [ADJ./OK] button to the right.

  • 5The setting screen for focus bracket appears.

    The setting screen for focus bracket appears.
    Press the [ADJ./OK] button to the right or the left Right-left to select the interval of the focus position, and then press the [ADJ./OK] button to set it.

  • 6The display returns to the shooting menu. Press the [ADJ./OK] button.
    The display returns to the shooting screen, and the symbol appears on the picture display.

    The display returns to the shooting screen, and the symbol appears on the picture display.

  • 7Half-press the shutter release button.
    The camera focuses according to the [Focus] setting.

  • 8Press the shutter release button all the way down. The camera takes five consecutive pictures based on the focus position in Step 6.

    The camera takes five consecutive pictures based on the focus position in Step 6.

 
Answer ID: edc06013
Date created: November 16, 2011
Date modified: December 5, 2011
Product: CX6
Operating system: --
Category: Hardware specifications, Hardware operations
Was this information helpful ?

Solved my problem
Somewhat Helpful
Followed the advice, but did not help
This FAQ was not relevant

Did you visit the FAQ before or after the purchase ?

Before
After

Please send us your feedback on this FAQ.


In order to protect your privacy, do not include any personal information. The feedback will not be encrypted during transmission. If you would like to have a reply, please contact us here.
Useful LINKs:
Do you need other information? Please click any link you want from the following.

Page Top

Products (Digital Cameras)