FV-L200B1

FV-L200B1

FV-L200B1

2MP Camera Link™ with pre-processing functions

Outline・Features

Handles a wide range of inspection uses, such as positioning prior to liquid crystal glass processing, circuit board mounted component checks and mounting inspection, automotive component flaw detection, medicine tablet inspection, etc.

  • High-speed frame rate of 2MP: 15 fps
  • Ultra-compact 28 mm × 28 mm CCD camera among the smallest in the industry
  • Uses PoCL (Power over Camera Link), which has a strong track record as a high-resolution digital camera interface
  • Camera contains automatic control functions for gain and shutter
  • Various trigger modes (pulse width, edge preset trigger) as standard features
  • Image processing with an on-board lookup table possible in the camera
  • M4 screw holes are located on four sides
    Sturdy construction for increased mounting precision
  • Dual power alternatives, either PoCL or an external supply possible
  • [Strobe signal output] enables user adjustment of exposure and the timing of light emission
    [Supported cameras] FV-L200B1, FV-L030B1, FV-G200B1, FV-G030B1

Incorporating a strobe signal output (LVCMOS level) function for light emission use. With this function, it is possible for the user to adjust the camera exposure timing (delay, time) and light emission timing (delay, time) in accordance with the trigger input signal received by the camera.

graphic

Dimensions

Imager 1/1.8" interline UXGA monochrome progressive CCD
Active picture elements UXGA:1620(H)×1236(V)
Cell size 4.4(H)×4.4(V)μm
Vertical frequency (Frame rate) 3.8599(3.8fps)/7.7198(7.6fps)/15.4397(15.3fps)Hz
in partial full scanning(default scanning mode)
Horizontal frequency 4.794(3.8fps)/9.588(7.6fps)/19.176(15.3fps)kHz
Pixel frequency 9.2045(3.8fps)/18.4091(7.6fps)/36.8181(15.3fps)MHz
Minimum scene illumination 0.1lux at F1.2
Sync. System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data(Base configuration)
Exposure time OFF, 1 to 1/30,000 sec. (Variable at every H and clock)(3.8fps)
OFF, 1/2 to 1/60,000 sec.(Variable at every H and clock)(7.6fps)
OFF, 1/4 to 1/120,000 sec.(Variable at every H and clock)(15.3fps)
Gain 0 to 27dB
Power supply Input voltage DC 12 Vdc ± 10%
Consumption Less than 3.0W
Dimensions 28(W)×28(H)×40(D)mm(NOT Including the connector)
Lens mount C mount
Weight Approximately 43g
Environmental
specifications
Operational
temperature
-5 to 50deg. C
Storage
temperature
-30 to 65deg. C

Related Information

*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).

Please feel free to send us an email with your inquiries about FA・Security.

Contact us

Page Top

Select Your Langage

Jump to FA・Security top of the selected language.

Related