FV-G200B1

FV-G200B1

FV-G200B1

Pre-processing functions and 2MP GigE Vision™ for a wide range of uses

Outline・Features

Suitable for diverse inspection uses, including positioning before each process in screen printing, circuit board mounted device part checks, automotive component flaw detection, etc. Also excellent for outdoor monitoring uses.

  • High-speed frame rate of 2MP: 15 fps
  • High image quality with a CCD global shutter
  • Camera contains automatic control functions for gain and shutter
  • Various scan modes (full, AOI) as standard features
  • Various trigger modes (pulse width, edge preset trigger) as standard features
  • Supports DC iris lens so also excellent for outdoor monitoring uses
  • Excellent for industrial uses as it handles a wide voltage range (10.8 - 26.4 V)
  • Supports updating of camera firmware via Ethernet
  • In addition to camera tripod screw holes, M4 screw holes are located on two sides (top and bottom)
    Sturdy construction for increased mounting precision
  • [AOI* scan mode] raises inspection quality and speed with efficient scanning
    [Supported cameras] FV-G200B1, FV-G030B1

AOI scan mode handles high-speed inspection. The user can freely define the start line and width of the image data. By scanning images of only the necessary portions, it is possible to transfer only the Images required. This, in turn, makes it possible to do speedy inspections by shortening the time required for reading and transferring data.

  • *Area of Interest

graphic

Dimensions

Imager 1/1.8" interline UXGA monochrome progressive CCD
Active picture elements UXGA:1624(H)×1236(V)
Cell size 4.4(H)×4.4(V)μm
Vertical frequency(Frame rate) 15.31668 Hz at full resolution
0.29261 to 61.26674 Hz adjustable via the communication
(Frame rate depends on the AOI setting)
Maximum frame rate(61.26674 Hz) is when vertical resolution AOI setting is 232.
Horizontal frequency 19.1761kHz
Pixel frequency 36.8181MHz
Minimum scene illumination 0.16 lux at F1.2, 15.31668 Hz
Sync. System Internal
Video output format Digital 8 , 10 or 12 bit Raw Data
Exposure time Preset continuous mode: 1 μsecond to 16,777,215 μseconds
Preset trigger mode: 1 μsecond to 16,777,215 μseconds
Pulse width mode: 1 μsecond to Unlimited
Gain 0 to 20.4dB
Gamma Gamma 1.0(Factory default) or uploadable gamma table
Power supply Input voltage +10.8 to +26.4Vdc
Consumption Less than 5.0 W
Dimensions 35(W)×35(H)×50.8(D)mm(NOT Including the connector)
Lens mount C mount
Weight Approximately 120g
Operational
temperature
Minimum Environmental temperature -5 deg. C
Maximum Camera housing temperature (top plate) shall not exceed 65℃
(This corresponds to an environmental temperature of approximately 35℃)
Storage temperature Environmental temperature -30 to 65 deg. C

Related Information

*Camera Link and GigE Vision are trademarks of the AIA (Automated Imaging Association).

Please feel free to send us an email with your inquiries about FA・Security.

Contact us

Page Top

Select Your Langage

Jump to FA・Security top of the selected language.

Related