MP5120A

Products

MP5120A photo

DVD+RW Alliance logoATAPI INTERNAL MODEL

DVD+RW 2.4X 8X     CD-R/RW 12X 10X 32X
 
  • Ricoh MP5120A Internal ATAPI DVD+RW drive
  • 1 Ricoh DVD+RW blank media
  • 1 Ricoh High Speed CD-RW blank media
  • Quik Start Instruction
  • Online Manual (User Manual)
    (For the drive and bundled software)
    • *available in the bundled CD-ROM
  • Analog Audio cable
  • Mounting screws
Our web site informs only about Ricoh Japan's Asia/Oceania Retail package.
Accessories or bundled software vary from a package to a package.

Specifications

Type Internal type
Interface ATAPI
Supported media for writing *1 DVD+RW, CD-R, CD-RW, High Speed CD-RW
Writing speed (DVD+RW) 2.4x
(CD-R) 2x, 4x, 8x, 12x
(CD-RW) 2x, 4x, 10x *2
Reading speed (DVD-ROM/DVD+RW) Max. 8x
(CD-ROM/CD-R/CD-RW) Max. 32x
Average access time (DVD) 140 msec. (8x)
(CD) 120 msec. (32x)
Data transfer speed
(at I / F)
Max. 33MB/sec. (Ultra DMA Mode2)
Power Requirement DC +5V/+12V
Power Consumption 16W
Buffer memory 2MB
Writing mode (DVD+RW) Random Access Write, Sequential Write
(CD-R/RW) Disc At Once, Session At once
*3 ,
Track At Once, Multi-Session, Packet Write
Writing format (DVD+RW) DVD-ROM, DVD-Video, Random Access Write
(CD-R/RW) CD-DA, CD-ROM, CD-ROM XA,
CD Extra, CD-I *3, Mixed-ModeCD, VideoCD, PhotoCD *3, CD TEXT, Bootable CD
Installation Horizontal / Vertical
Weight Less than 1.2 Kg
Dimensions
( W x D x H)
145.6 X 196.4 X 41.6mm
(including the front panel)
  • 8cmsingleCDs cannot be written, but can be read or played back using this drive.
  • * 1 :This drive cannot record on DVD+R media, DVD-R media, DVD-RW media, and DVD-RAM media.
  • * 2 :10x speed CD-RW writing requires High Speed CD-RW media.
  • * 3 :Bundled software does not support this feature.

System requirements

Hardware IBM PC/AT Compatible
Free half-height bay and space for 12V/5V power connector required.
(Need the slot, which is equal to about 42mm to be built in to a PC.)
Interface 1 free IDE interface connector (Primary slave, Secondary Master or Secondary slave)

for DVD+RW writing

OS *1 Windows95(OSR2.0 or later)/98/98SE/Me/2000 Professional/
WindowsNT Workstation4.0(Service Pack 5 or later)
CPU Pentium2 400MHz processor or faster
(Pentium3 800MHz processor or faster recommended ) *2
RAM Minimum 128MB(Over 256MB recommended)
HDD Over 750MB free disk space (Over 5GB recommended )
  • * 1 :Windows95/98/WindowsNT Workstation4.0 do not support MyDVD. (98SE supported)
  • * 2 :Pentium4.1.4GHz processor or faster is recommended when Direct-to-DVD function is used. Harware for the capture such as a video capture board is necessary.

for DVD-Video playing back

OS Windows95(OSR2.0 or later)/98/98SE/Me/2000 Professional/
WindowsNT Workstation4.0(Service Pack 5 or later)
CPU Pentium2 350MHz processor or faster
(With Motion Compensation function in the VGA Chip, Pentium2 300MHz processor or faster)
RAM Minimum 64MB

for CD-R/RW writing

OS Windows95(OSR2.0 or later)/98/98SE/Me/2000 Professional/
WindowsNT Workstation4.0(Service Pack 5 or later)
CPU Pentium 166MHz processor or faster (When JustLink is used)
RAM Minimum 64MB
HDD Over 100MB free disk space
(When using On-the-fly writing and JustLink)

Page Top

For MP5120A users