150mA ULTRA LOW SUPPLY CURRENT LDO REGULATOR
The RP104x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current and low ON-resistance. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit and a chip enable circuit.
These ICs perform with ultra low supply current (Typ.1.0µA), which prolong the battery life.
Since the packages for these ICs are DFN(PLP)1010-4, SOT-23-5 and SC-82AB (Non-promotion), therefore high density mounting of the ICs on boards is possible.
SC-82AB (RP104Q Series) will be discontinued at the end of January, 2014.
|Supply Current||Typ. 1.0µA
(Except the current through CE pull down circuit)
|Standby Current||Typ. 0.1µA|
|Dropout Voltage||Typ. 0.24V (IOUT=150mA, VOUT=2.8V)|
|Temperature-Drift Coefficient of Output Voltage||Typ. ±40ppm/°C|
|Line Regulation||Typ. 0.02%/V|
|Output Voltage Accuracy||±0.8%|
|Packages||DFN(PLP)1010-4, SC-82AB (Non-promotion), SOT-23-5|
|Input Voltage Range||1.7V to 5.25V|
|Output Voltage Range||1.2V to 3.3V (0.1V steps)
(For other voltages, please refer to MARK INFORMATIONS.)
|Built-in Fold Back Protection Circuit||Typ. 40mA (Current at short mode)|
|Ceramic capacitors are recommended to be used with this IC||0.1µF or more|
- ・Power source for portable communication equipment.
- ・Power source for electrical appliances such as cameras, VCRs and camcorders.
- ・Power source for battery-powered equipment.
|Data Sheet||Flyer||Package Info.||Mark Info.||Quality Assurance Data|
All PDF files are less than 1MB unless otherwise stated.
- Technical Support