R1210Nxx1x Series

PWM STEP-UP DC/DC CONVERTER

Data Sheet / Flyer
Data Sheet * Flyer

The R1210Nxx1x Series are CMOS-based PWM step-up DC/DC Converter, with high accuracy, low supply current.

Each of the R1210Nxx1x Series consists of an oscillator, a PWM circuit, a reference voltage unit, an error amplifier, phase compensation circuit, resistors for voltage detection, a chip enable circuit. Further, includes a controller against drastic load transient, a control transistor with low ON-Resistance, ‘LX switch’, and a protection circuit for LX switch and an output voltage detector. R1210Nxx1A Series contain further a circuit for changeover oscillator frequency each. A low ripple, high efficiency step-up DC/DC converter can be composed of this IC with only three external components, or an inductor, a diode and a capacitor.

The R1210N Series can detect drastic change of output voltage with a circuit controller. The load transient response is improved compared with current model, furthermore the R1210Nxx1A Series have another function, that is, when the load current is small, oscillator frequency is decreased by a circuit for switching oscillator frequency from Typ. 100kHz to 35kHz, therefore, supply current is reduced.

The built-in chip enable circuit can make the standby mode with ultra low quiescent current.

Since the package for these ICs is small SOT-23-5, high density mounting of the ICs on board is possible.

External Components Only an inductor, a diode, and a capacitor
Standby Current Max. 0.5μA
Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C
Output Voltage Range 2.2V to 3.5V (xx1A), 2.2V to 6.0V (xx1C/D), 0.1V steps
Two choices of Basic Oscillator Frequency 100kHz(xx1A/C), 180kHz(xx1D)
Output Voltage Accuracy ±2.5%
Package SOT-23-5
Efficiency Typ. 88% (VIN=Set Output Voltage×0.6 [V], IOUT=10mA)
Low Ripple, Low Noise
Built-in a driver transistor with low on-resistance
Start-up Voltage Max. 0.9V
Basic Frequency change-over circuit (only for xx1A type) from Typ. 100kHz to 35kHz
  • Power source for battery-powered equipment.
  • Power source for portable communication appliances, cameras, VCRs.
  • Power source for appliances which require higher voltage than battery voltage.
Data Sheet Flyer Package Info. Mark Info. Quality Assurance Data
R1210Nxx1x Series R1210N Series SOT-23-5 R1210N Reliability

All PDF files are less than 1MB unless otherwise stated.

  • Buy Products / Order Sample

Distributors

Ricoh semiconductor products are available at those dealers.

Information

Page Top