R1224N Series

PWM/VFM step-down DC/DC Controller

Data Sheet / Flyer
Data Sheet * Flyer

The R1224N Series are CMOS-based PWM step-down DC/DC Converter controllers with low supply current.
Each of these ICs consists of an oscillator, a PWM control circuit, a reference voltage unit, an error amplifier, a phase compensation circuit, a soft-start circuit, a protection circuit, a PWM/VFM alternative circuit, a chip enable circuit, resistors for output voltage detect, and input voltage detect circuit. A low ripple, high efficiency step-down DC/DC converter can be easily composed of this IC with only several external components, or a power-transistor, an inductor, a diode and capacitors. Output Voltage is fixed or can be adjusted with external resistors (Adjustable types are without PWM/VFM alternative circuit).

With a PWM/VFM alternative circuit, when the load current is small, the operation is automatically switching into the VFM oscillator from PWM oscillator. Therefore, the efficiency at small load current is improved. Several types of the R1224Nxxx, which are without a PWM/VFM alternative circuit, are also available.

If the term of maximum duty cycle keeps on a certain time, the embedded protection circuit works. The protection circuit is Reset-type protection circuit, and it works to restart the operation with soft-start and repeat this operation until maximum duty cycle condition is released. When the cause of large load current or something else is removed, the operation is automatically released and returns to normal operation.Further, built-in UVLO function works when the input voltage is equal or less than UVLO threshold, it makes this IC be standby and suppresses the consumption current and avoid an unstable operation.

Supply Current Typ. 20µA (R1224Nxx2E/F/M/L, R1224N102M)
Typ. 30µA (R1224Nxx2G, R1224N102G)
Typ. 40µA (R1224Nxx2H, R1224N102H)
Standby Current Typ. 0µA
Input Voltage Range 2.3V to 18.5V
Output Voltage Range 1.2V to 6.0V (0.1V steps; R1224Nxx2x)
1.0V to VIN (R1224N102x)
Output Voltage Accuracy ±2.0%
Oscillator Frequency Typ. 180kHz (R1224Nxx2L/M, R1224N102M)
Typ. 300kHz (R1224Nxx2E/G, R1224N102G)
Typ. 500kHz (R1224Nxx2F/H, R1224N102H)
Efficiency Typ.90%
Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C
Package SOT-23-5
Built-in Soft-start Function Typ. 10ms
Built-in Current Limit Circuit

  • Power source for hand-held communication equipment, cameras, video instruments such as VCRs, camcorders.
  • Power source for battery-powered equipment.
  • Power source for household electrical appliances.
Data Sheet Flyer Package Info. Mark Info. Quality Assurance Data
R1224N Series R1224N Series SOT-23-5 R1224N Reliability

All PDF files are less than 1MB unless otherwise stated.

  • Buy Products / Order Sample

Distributors

Ricoh semiconductor products are available at those dealers.

Information

Page Top